Boat Seat Covers

There are many people who desire of owning a boat and enjoy its ride as and when they want. However, if you happen to purchase one, you will genuinely be satisfied if the possession is kept in a well-maintained state, with its newness preserved for a substantial amount of time. Maintaining the proper condition of the boat is not a very tough task, which otherwise is believed to be. Using seat covers is one of the best ways to maintain its condition. It is certain that you would want your boat to shine as new when boating and in general.

Advantages

There are many different benefits of using boat seat covers. The main advantage is that they help in maintaining the shine of the upholstery by keeping it away from dirt. They also protect it against heavy rain, harmful ultraviolet rays, or from any bad condition of the weather. In addition, they also prevent damage to the upholstery from rodents like mice. Another good thing is that they make the seats look aesthetic and attractive.

Since you have spent a significant amount of money in buying the boat, you would surely not like the seats getting cracked or their color fading away. These covers do perform the job of preventing such cracking and fading. It is better to use them on the boat, in case you are planning to sell it off in the near future. The boat, being in much of its original condition, will be a good reason for it to reduce the depreciation value during resale.

Types

Generally, there are two types of boat seat covers: permanently attached and removable ones. There are some boats, which have permanently attached covers installed. These are permanently secured to their upholstery, due to which they cannot be taken out. And because these cannot be removed, cleaning becomes a very difficult job. On the other hand, there are removable ones, which can be taken out from the seats. This makes it much easier to clean the seats, as well as the covers.

If you do not want readymade seat covers, just because they do not fit well onto the seats, you do have another option. The option of custom ones is the best for solving the problem of poor fitting. These covers are made as per the measurements of the seats that are given by you to the manufacturers. Some manufacturers even offer to choose from a variety of patterns, colors, and even materials.

When it comes to purchasing such covers, it is suggested that you choose removable ones as they are easier to clean. It is better if you choose to purchase the customized ones, as they will fit well onto the seats, with having a style and pattern of your own. If you have any doubts, you need to take help from a professional.

How to Build a Pontoon Boat

The design of a pontoon boat – also regarded as a party barge, is quite an inexpensive build compared to other boat designs. It comes with a sophisticated form of shallow draft that reduces its risk of submerging. This, indeed, is the reason why a number of big vessels are equipped with pontoon boats for emergency situations. In the United States, pontoon boats are popular for serving as rental boats to ferry people across rivers. Moreover, their user-friendly structure and maneuverability through most water bodies label pontoon boats an ideal fishing-cum-sightseeing vessel.
Before Building the Boat
Building a pontoon boat is not tough, though it is not easy as pie. It, certainly involves work, and an elementary degree of understanding the mechanics of assembling the boat. The basic structure of a home-built pontoon boat is like a catamaran or a trimaran boat, where the platform is used as a dock. All one needs is quality material, a blueprint of the boat, and undoubtedly, hard work.
Three Points to Remember
Design
Sketch out a concrete plan for the boat. There are small-, medium-, and large-sized cruisers that one may build; however, considering that you are a novice, we begin with a small-sized pontoon boat with just the basic, absolutely necessary design.
Location
Prefer a location that is close to the waterfront and where your boat-in-the-making may be moored safely.
Material
While building the boat, ensure you choose the right kind of material. Some may suggest using PVC pipes for pontoons; however, aluminum pontoons are always advisable for use. Aluminum is sturdier; a hydrodynamically sound metal that promises safety and serves you for long.
As far as the material-buying activity is concerned, stores dedicated to boating material ought to have the hardware. To make the task easier, frequent boating departments lined near water bodies. If you are a regular at scanning online stores, punch in the name of the hardware or material that will be required in the search bar, review, and add it to your cart! You may visit their forums, read reviews on products, take a look at their ratings, scour the details of the material, and finally get to the cash counter once you are thoroughly satisfied. For those who think online it is, a word of caution: Document your purchases. See to it that you receive what you order
Material for Building a Pontoon Boat
Frame Hardware
~ 2 Rows of Aluminum Pontoons (type 5052 H32 aluminum; the rows being 12′-0″ each, 36” in diameter)
~ 10 Aluminum Hat Cross-channels (6′-0” cross-channels extending from one pontoon to the other, each measuring 2.5″ thick and 4″ wide)
~ Boat trim (2” x 4” for a 6′ x 12′ cruiser)
~ Stainless Stern and Bow Trim Corner Caps (4½” high and 4¼” wide)
~ For Anodized Aluminum Tube Railings (24” high and 1½” diameter)
~ 4 Railing Corner Caps (3” thick)
~ 4 Aluminum Braces (10” high)
~ 10 Pontoon Rail Risers (⅜” thick)
~ 2 Hinges for the Gate (9” in length and 2” wide)
~ For Plywood Decking
~ 3 sheets of 7-Ply, ¾” Plywood Decking (for a deck that is 6′ x 12′)
~ ¾” plastic slip-proof vinyl carpet
Enhancers
~ 1 Seat (with swivel and an adjustable pedestal)
~ 6 Webbing Attachment Straps (1” thick)
~ A Pair of Sidelights
~ 2 Pontoon Fenders
~ 2 – 4 Deck Cleats
~ Trolling Motor
~ Prefabricated Foldable Deck Ladder (A 4-step ladder would be just fine)
Fastening Material
~ Epoxy resin (2 gallons), screw gun, hammer, Cordless drill with ⅛” drill bit
~ Marine Carpet Glue (2 gallons)
~ Jacks
~ Pontoon Deck Joint Tape (50′-0” long roll, 2″ wide)
~ 3½” Stainless Fence Bolts (A pack of 32)
~ 1½” Stainless Deck Bolts (A pack of 100)
~ U-shaped Trowel (⅛” thick)
~ 80-grit sandpaper
~ 1 Foam Brush (2” wide)
Procedure for Building a Pontoon Boat

Illustrative sketch of a patch of the deck of the pontoon boat
Aluminum Pontoons
Parallel the two rows of aluminum pontoons on a flat surface. The internal distance between the two, when placed, should be 3′. The pontoons must be fabricated with type 5052 H32 aluminum. This aluminum/magnesium alloy displays resilience to corrosion, courtesy of the moisture that the metal comes in contact with.
Aluminum Hat Cross-channels
The two rows of pontoons must then be connected with the aluminum hat cross-channels 18” center to center. The adjacent gap between every cross-channel should be 18”. Cross-channels reinforce the pontoons for enhanced support and reliability.
Plywood Decking
Remember: Your marine-grade plywood has to be sanded and sealed before installation. You are to use a 7-Ply ¾” marine-grade ply. In accordance with its thickness and consistency of layers, seal the plywood. Saw the plywood sheets according to the size you desire for your boat deck, and place it on the cross-channels.
Drill holes through the plywood and cross-channels for 1½” stainless deck bolts, every 12” across the deck. Don’t fasten the bolts yet. Now, sand the plywood surface and its edges with 80-grit sandpaper. Dust the plywood post sanding. Using a 2” wide foam brush, seal one side and the edges of the marine-grade plywood with epoxy. Let it dry completely to switch over to the other side of the ply.
Repeat this process 5 to 7 times to save your deck from premature deterioration and warping. Needless to mention, this process would consume a considerable amount of time. Once the sealing process is complete, run a strip of joint tape on each cross-channel.
Install the plywood decking over the joint tape to secure it to the cross-channels. Fasten the deck to the cross-channels with 1½” stainless deck bolts. Fill the peripheries of the fasteners (bolts) with epoxy resin, wherever necessary.
Now, apply a ¾” plastic slip-proof vinyl carpet with marine carpet glue on the plywood. This, sure, would do a good turn to your deck as this would prevent slippage. You must consult a fabricator before carpeting, to check whether the carpet should be laid before, or after the aluminum tube railings are installed.
To camouflage the raw edges of the ply, carpet, and the cross-channels, a boat trim is applied to refine the look of the deck. Attach the trim to all four sides of the boat. Use trims that are inherently equipped with bumpers and grab handles.
Consult a fabricator to ready the aluminum railings for your boat. Ideally, the components mentioned in this section should be attached to the tube railing. However, the fabricator may have a different take on the said issue and may suggest another feasible way to construct the railing and boosting its reliability. Consider his inputs, as well.
Anodized Aluminum Tube Railings
The fabricator will measure your deck, and accordingly construct the anodized railing for the boat. An anodized railing promises strength and longevity, thereby appearing well-groomed in the bargain. With regard to the positioning of the railing, a 2′-0” distance from the rear and front end of the boat, respectively, should be maintained. Thus, your railing will span 8′-0” of the total 12′-0” of the plywood decking.
Rail Risers
To span the life of the fence railing, as well as the vinyl-boosted ply, rail risers are used. The risers are U-shaped with circular edges. They are positioned in a way that the circular edges, seat the base of the rail, and the U-shaped depression encircles the 3½” stainless fence bolt. Preferably, 5 rail risers across the length and 2 across the width of the pontoon deck are installed.
Aluminum Braces
Your boat’s rail is braced with aluminum braces to provide the much-required support to your rails. It nullifies the probability of rattling. The brace is then drilled and fastened with bolts onto the railing and through the deck.
Railing Corner Caps
Railing corner caps are used to strengthen the dimensions of the railing. The radius cap is drilled through and bolted down to the deck. In the meantime, until the railing is ready to be installed, you may work toward assembling the rest of the hardware and enhancers.
Webbing Attachment Straps
Use three webbing attachment straps on both the pontoons to provide your cruiser with an enhanced hold. A 1” wide strap must embrace the pontoons through their circumferential surface extending through the cross-channels on to the deck. Fasten the strap with epoxy resin, followed by drilling 1½” stainless deck bolts for a sustainable and solid grip.
Deck Cleats
They provide deck support and facilitate an easy way to slip a tie-down through two holes at the base. For all those keen fishermen and women, cleats come in handy. Just slip the fishing line through the holes at the base of the cleat, with a bobber attached to fetch a catch!
Attach deck cleats on all four sides of the deck with the help of stainless pontoon deck bolts. You may leave out the stern (rear) corners of the boat, and attach the cleats at the corners of the bow (front section) of the deck only.
Sidelights
To increase the quality of visibility for navigation during the dark hours, install sidelights at the front corners of the deck. However, do not place the pair at the edge. Space the sidelight 1′-0″ away from the deck corner. Sidelights are a must as they are proven aids to navigation.
Trolling Motor
Install the trolling motor; it would adhere to the outboard setup of the pontoon boat. The trolling motor is installed at the stern (rear) of the boat. Just use the hand-held remote controller to start the motor, and maneuver the boat.
Mount a seat amidships (in/toward the center) of the boat. To redefine comfort on board, choose a chair with armrests and an adjustable backrest. A swivel and an adjustable pedestal ought to be a part of the seating package in order to cruise in comfort.
Pontoon Fender
Knot the hanger string of the pontoon fender to the topmost rail. Position the fender in a way that its string length extends through the deck to the pontoon rows. Fenders are an important inclusion to the boat design, as they keep the aluminum railings from damage when docking. They serve as cushions that brave the docking impact while mooring the pontoon boat.
Foldable Deck Ladder
Hinge a foldable deck ladder to the hat cross-channels with the help of 1½” stainless deck bolts. You needn’t worry about the storage of the ladder. When not in use, it may be pushed backwards to the frame of the pontoon.
Important!
This small-sized cruiser capacitates for 3 to 4 individuals. Burdening the boat with more than the number mentioned may hamper the buoyancy of the boat. The illustration shows only a patch of the deck being covered with ¾” plastic slip-proof vinyl carpet; however, the deck is to be carpeted completely. This approach is used purely for illustrative purposes.
Make sure you adhere to all the safety regulations. Stock an essential pack of gear, such as life jackets, throwback rubber rings, ropes, whistle, and a bell aboard. A light-duty pontoon trailer would tow the boat into the water. However, practice is an absolute must, when you are keen to perfect your skill of plowing your pontoon boat through the waters with considerable ease. Prefer having a mate accompany you to help draft the pontoon boat. Have someone guide your movements. To wrap it up, you may be a bravado at heart, but when it comes to casting the pontoon boat, assistance, indeed, is insisted!

Fishing Spots Around the Point Judith Area in Rhode Island

There are a number of fishing spots around Point Judith that can be very productive. Listed below are many of those areas describing where they are and methods to use for fishing them.

Outside the East Wall. On the outside of the East wall fishing in close you can work plugs and soft plastic baits in the pockets created by the wall. Be very careful as it can be dangerous when the wind is out of the south or southeast, driving you straight at the wall. You can also troll along the edge of the wall if the weather is calm, but be careful of the many lobster pots waiting to ambush you.

Outside the West Wall. On the outside of the West wall in close you can work plugs and soft plastic baits in the many pockets found along that wall. Be very careful as it can be dangerous when the wind is out of the south or southwest, driving you straight at the wall. Also beware of the fish trap located outside this wall. Trolling is also another option but beware of the many lobster pots on this side.

Outside the Center Wall. On the outside of the Center wall in close you can work plugs and soft plastic baits in the many pockets found along that wall. The best pocket is right to the east of the apex of the center wall. Be very careful as it can be dangerous when the wind is out of the south or southwest, driving you straight at the wall. It is best to work your way along the wall, hitting each pocket not spending a lot of time in any one area unless you actually catch a fish, then fish there till you stop catching and move on. Trolling is also another option but beware of the many lobster pots on this side. South of the center wall there are many rocks on the bottom which provide structure for bait to hide in. Sea Bass, Scup, and Stripers can be caught in this area. Drifting with bait or trolling are some of the methods that can be used here.

The Rocks at Point Judith. In front of (south) the rocks at point Judith you can work plugs and soft plastics, or use live bunker, shad, or scup to catch stripers. The water is under 20 feet deep here. Also there are some rocks that are submerged, be very careful and pay attention to your GPS chartplotter, most of them show the position of these rocks. You can also troll this area, just stay away from the lobster pots which are not so much of a issue here.

Inside the center wall when big waves break over the top onto the inside. Under these conditions bass will hang on the inside looking for bait which is thrown up over the top of the wall by the wave action, so they can pounce on it while the bait is still disoriented. Topwater plugs or soft plastic baits that mimic the fish they are feeding on will work.

Near the fish trap inside the east wall. The fish trap inside the East wall catches a lot of fish and many times there are fish struggling against the net to get free. The vibrations put out by these struggles will attract predators. Plugs and soft plastics can be used to catch them. Be careful of the ropes and buoys, you can get tangled up or drift into them if you’re not careful.

East side of Point Judith. In close to the shore on the east side of the point there are some large boulders and pockets that can hold fish. Care needs to be taken when approaching as many of the rocks are submerged and not visible except by the eddies that occur around them. Plugs and soft plastic baits will produce here. Trolling can also be productive in somewhat deeper water here away from the rocks. In the fall many boat charters can be seen in this area.

Inside the Harbor of Refuge. In the early morning you can sometimes see fish chasing bait on the surface. If you pay attention the rewards can be many. This is not always accompanied by bird activity, so don’t assume that birds are your only indicator. Also, the fish don’t necessarily jump out of the water, they may just swirl the surface, and these swirls are harder to spot. This is good advice anywhere outside the harbor of refuge as well.

All of these areas around Point Judith are best fished in the morning between 6:00am and 10:00am. It is also necessary for the tide to be running. In the fall they can be extremely productive areas. Try them out and see what you think.

Locate Fishing Spots Using GPS

Before technology evolved to what it is now, fishermen relied on paper charts and instincts in order to find a great fishing spot where they can catch some great fish. Paper charts were the only guide a fishermen could carry with him during a fishing trip. Today however, with the improvement in technology paper charts are now stowed into drawers because of the rise of such gadgets such as GPS chart plotters.

GPS or Global Positioning Systems have helped fishermen tremendously with navigating through waters. Not only that, these GPS systems have also helped fishermen find great fishing spots. It’s pretty safe to say that these GPS systems have drastically changed the way fishermen fish these days. Not everyone have been sold to these GPS systems though, there are those traditional fishermen who still rely solely on paper charts. There are also some who are reluctant to get these installed because they think that this is a complicated piece. Though it does require some getting used to, it is still a very helpful device that will make your fishing trips a whole lot easier and stress free.

Now you might be wondering how does a GPS work and how can it help you navigate and find a good fishing spot? GPS basically rely on satellites for the information that they provide. These satellites go around the globe at least twice a day and transmit back to earth any information needed. Once these signals are in, these are then used in order to come up with an exact location of the user by means of pinpointing and triangulation of the exact spots.

GPS as a navigational device for fishing can provide very accurate information because of the multi-channel designs that they come with. A standard GPS fish finder can detect and provide accurate information to depths of up to 15 meters. As mentioned earlier, aside from accurate information, they can also help any fisherman locate some great fishing hot spots near their area that may not be available on older charts. You also have a choice to share it with your friends who are planning to fish or are on another boat.

Truly, technology has improved the lives of fishermen around. Gone are the days when you have to pull out those old charts. Fishing with the GPS system, all the information you need are available all at the touch of a button. It has a lot useful features that will make your fishing adventures fun, safe, and a great success!